Weatherization Barnraising: This Old Extreme White House Makeover

Saturday, December 6, between 30 and 40 people came to a house in Cambridge, MA to do a weatherization barnraising. We began checking in at 8 am to start work at 9. There was a blower door and an infrared camera to test our results. This was part of the public access TV series Energy Smackdown, a competition between different towns to see which can reduce their carbon footprint most. Materials were donated by EFI and Home Depot. Byggmeister donated the blower door and infrared camera and the operator, Kerry Koskinen, volunteered his time.

A blower door depressurizes the house by 50 Pascals so that you can see where the air leaks in. You can feel the draft with the back of your hand or see it with a smoke pencil (or a stick of incense or a cigarette). A blower door test costs from $200 to $500 and is well worth it if you are serious about cutting down infiltration. On average, 2 professionals in one day will reduce air leaks by about 250 cfm [cubic feet per minute].



We started at 4500 cfm at 50 pascals and after 3 hours of work and about $500 of materials we ended at 3850 cfm.





The infrared camera gave us a clear view of where the leaks were. The camera records temperature and you can see heat as the lighter colors and coolth as the darker. The temperature scale is registered on the left of the picture. Unfortunately, the battery on the IR camera conked out before Kerry could do the after pictures.









An IR thermometer which costs $70 rather than $7000 for an IR camera will also work but it just ain't as kewl. And there's an infrared "heat seeking ray gun" whose beam changes color in the presence of cooler temperatures that should be available sometime in 2009 for $39.99.

I was working on windows, putting Mortite rope caulk around the window sash. Unfortunately, the windows had plastic cladding and the composition of Mortite has changed since the last time I used it. It wouldn't stick. Very frustrating. I switched to insulated the wall sockets instead. Eventually, we changed to weatherstripping tape, a product I hadn't used before and didn't use that day either as I had a previous engagement and had to leave early. Later reports informed me that most if not all the windows were weatherstripped in record time.

The organizers reported that

With the "blower door" and infra-red camera to guide us, we found that we reduced the air infiltration at Chris and Pam's last weekend by 15%. This will be close to what you can expect in your own home if you decide to weatherize as we all learned to do. That should be worth about $200/year at current fuel prices.

We didn't finish insulating the attic hatch which would have reduced the air infiltration even more.

This is what the crowd looked like as we gathered for our instructions.



A good time was had by all, with the possible exception of the cat who I heard got insulated behind a wall for a day or so.

I'd like to see a weatherization barnraising at the White House. Complete with blower door test and infrared camera.

I'd like to see President Obama kick off the move to green jobs with a weatherization, insulation, and energy efficiency work day on public buildings. There are plenty of repairs and upgrades for government buildings that provide immediate rewards, saving enough money through lower energy costs to pay back in a couple of years. This is exactly where the green job economy starts. Architecture 2030 has a stimulus plan to create millions of jobs by applying energy efficiency methods to existing buildings that would pay for itself in energy savings within five years.

from Architecture 2030 Stimulus Plan - pdf alert:

With a federal investment of $85.56 billion each year for two years, the Plan will:
in just two years,
create at least 8.445 million new jobs and
create a new $1.6 trillion renovation market
and in just five years,
save consumers $142.33 to 200.88 billion,
reduce CO2 emissions by 481.13 Million Metric Tons,
reduce energy consumption by 6.17 Quadrillion Btu,
save 1.83 trillion cubic feet of natural gas and
save 83.35 million barrels of oil.

I'd like to see President Obama bring weatherization barnraisings to the national level but, even if he doesn't, we'll continue to have weatherization barnraisings in Cambridge. The next barnraising is at a local public school and will have the help of the MIT Sustainability Club, a student group. I can imagine weatherization and, later, solar barnraisings on one school building a month, with energy efficiency training building throughout the community. A consistent program of hands on energy education could be significant.

from MIT Sustainability Club:

HEET, a Cambridge-based energy efficiency team, is weatherizing the Cambridgeport Public School. We need someone who can install a few photosensors in classrooms and stairways so when it's bright enough from daylight, the lights turn off. The person should be able to teach a few volunteers how to do this work also (safely).

The Cambridge public school system needs help decreasing its energy use, so more of its budget goes to teachers and books, than to wasting energy. Help us help them.

The event is tentatively planned for January 19th, from 12:30 pm to 5 pm
Cambridgeport Public School, 89 Elm St. Cambridge

If interested, email Audrey@audreyschulman.com

HEET (Home Energy Efficiency Team) was recently awarded a Climate Superstar by MCAN. Check out the article the Boston Globe wrote about HEET:
http://www.boston.com/news/local/massachusetts/articles/2008/11/30/turning_up_heet/

Windowbox Solar Air Heater

This is a demonstration model of a solar windowbox air heater.

You can build it from a sheet of insulation board, some clear glass or plastic, and a furnace air filter painted black.

When the sun shines, the black absorber inside the insulated windowbox gets hot, heating air which rises into the room behind the window, and drawing cooler air from inside that room past the absorber in a thermal loop that lasts until the sun goes down.

At night, the cold air sinks to the bottom of the windowbox and closes off this thermal loop so there is no additional night time heat loss.

Increase the efficiency of the windowbox solar air heater with a solar electric, photovoltaic, PV fan.

This demonstration model uses a repurposed solar car window ventilator. Only when the sun hits the PV panel does the fan move air, an automatic solar circuit thermostatic control.

The windowbox solar air heater is a supplemental heater for one room with a south-facing window and can be modified to provide increased ventilation and cooling in the summer as Edward Sylvester Morse's 1881 solar air heater design did.



Cost for a 2 foot by 3 foot insulation board solar windowbox air heater is around $100. PV fan car vents are available for as little as $5. One recently built windowbox has heated air by at least 20º Fahrenheit, from 65 to 85º, and will do so all winter.

Old Solar: 1980 Barnraised Solar Air Heater

This house has been solar heated for nearly 28 years now, the glazed black box on the south wall pumps heat into the living room whenever the sun shines, consistently and reliably. It was built in the Riverside neighborhood of Cambridge, MA in 1980.

This solar collector is an air heater that takes air from the kitchen,


moves it past the black absorber plate with a fan,


and then exhausts the solar heated air back into the living room.


Sometimes on sunny winter days, the people who live there have to flip the damper and dump the collector's air outside to prevent overheating.


It has worked unfailingly all these years without any major maintenance, even for the fan and the thermostat that turns it on and off.

Unfortunately, this solar air heater will soon be at least partially shaded. The vacant lot next door is being developed for condos and the new construction will shade the sun from the collector for part of the day. The collector's owners bought a part of the property next door so that their collector will still see some sun and received a settlement from the developer to compensate them for the loss of their sun rights. That money will help pay for the new solar electric panels they've installed on the roof.


The panels cost around $26,000 and have supplied as much as 2 kilowatts to the household.


There is a special meter just for the solar array.


Some days they even run the electric meter backwards.


After the state and Federal rebates, the installation will cost around $17,000, less the sun rights settlement. That old solar air heater not only provided reliable space heat for 25 years but will help pay for the new solar electric panels. Not bad.

In the course of this recent solar experience, one of the owners approached the city zoning board and the city council about solar shading and zoning. Now the city manager has a committee examining the issue of sun rights and the hope is that soon we will have a policy that will help Cambridge become more of a solar city.

This solar air heater was barnraised by the Urban Solar Energy Association, now the Boston Area Solar Energy Association, in 1980. It was one of six such projects sponsored by a community development corporation (CDC) called Riverside Cambridgeport Community Corporation. I located another project still around from those days at the Cambridge Community Center in the same neighborhood.



I haven't found out yet whether it's still working but the glazing needs to be replaced (there was a 25 year warranty on Kalwall, as I recall). Solar Barnraisings are beginning to come back into style. Reglazing this old collector would be a great way for the next generation of solar barnraisers to start.

PS: These types of simple air heaters can be modified for summer use to provide solar ventilation and cooling too, as Edward Sylvester Morse's solar air heater from 1881 demonstrated.



More Old Solar:
Old Solar: Keck and Keck Twentieth Century Modern
Old Solar: Venetian Vernacular
Old Solar: 1881

More on simple solar devices:
A South-Facing Window Is Already a Solar Collector

Homefront Advantage

I finally finished a short video (less than two minutes) on WWII posters for the Homefront. These posters exhorted all of us to become part of the war effort. It wasn't about "going shopping" then, it was about energy and resource conservation, rationing ourselves for the benefit of our armed forces, and making the Homefront an effective front for fighting the Axis powers.

In 2004, I tried to contact the Kerry campaign to convince them to use these posters in reminding us of our history. I think they would be just as effective this election year.

I also hand delivered to Al Gore a packet with some of my favorite WWII posters but, again, have seen no results from this attempt.

Links to more of my favorite WWII posters at
http://www.dailykos.com/storyonly/2006/10/29/2145/7162
http://www.dailykos.com/story/2007/12/22/225321/63/96/425004
http://solarray.blogspot.com/2006/07/its-all-one-war-that-never-ends.html

Solar IS Civil Defense, Illustrated

Solar IS Civil Defense
Like this solar LED light and AA battery charger


or this solar/dynamo am/fm/sw radio, similar to the ones US and NATO forces have distributed in Afghanistan.

Solar IS Civil Defense
and, after all,
we are at war.


Solar IS Civil Defense
a flashlight, radio or cell phone, an extra set of batteries
solar powered
with hand or foot operated dynamo back-up,
emergency lighting and communication
day or night
from sunlight or
muscle power.

One solar component
is an LED flashlight
which also charges AA batteries.
This design allows for
battery switching,
charging a second set of batteries
to use in other devices.

The Bogolight is a charger and light
with an international development
addition:
each light bought
buys another solar LED light and battery charger
for someone who has no access to electricity
in this world.

Solar IS Civil Defense in another way.


US and NATO forces have distributed
solar/dynamo am/fm/sw radios
in Afghanistan.

Those solar/dynamos could easily charge
AA batteries
and establish a low power DC grid
through battery switching.
This level of survival electricity
would raise the standard of living
for most Afghanis,
helping to rebuild their lives
as well as their country and economy.

This circuit diagram is one way
to add this capability to the present
solar/dynamo radios now in Afghanistan.



The image I have is of a
solar swadeshi, hand-made electricity.
Instead of turning the handle
of the charkha spinning wheel
making thread
for khadi cloth
an hour a day as Gandhi did,
turning the crank of a dynamo a half hour a day,
the direct production of survival power
for yourself, your family, and your community,
swadeshi, local production.

How did Gandhi's Pashtun colleague,
Badshah Khan practice it?
And could his example
help bring peace back
today?

Lifecycle Costs of Photovoltaics

Treehugger had a squib about a recent Brookhaven Labs analysis of lifecycle cost assessment for photovoltaic panels. There wasn't a direct link so I had to do a little digging to find it but the conclusion alone is worth it:

Using data compiled from the original records of twelve PV manufacturers, we quantified the emissions from the life cycle of four major commercial photovoltaic technologies and showed that they are insignificant in comparison to the emissions that they replace when introduced in average European and U.S. grids. According to our analysis, replacing grid electricity with central PV systems presents significant environmental benefits, which for CdTe PV amounts to 89–98% reductions of GHG emissions, criteria pollutants, heavy metals, and radioactive species. For roof-top dispersed installations, such pollution reductions are expected to be even greater as the loads on the transmission and distribution networks are reduced, and part of the emissions related to the life cycle of these networks are avoided.

It is interesting that emissions of heavy metals are greatly reduced even for the types of PV technologies that make direct use of related compounds. For example the emissions of Cd from the life cycle of CdTe PV are 90−300 times lower than those from coal power plants with optimally functioning particulate control devices. In fact, life-cycle Cd emissions are even lower in CdTe PV than in crystalline Si PV, because the former use less energy in their life cycle than the later. In general, thin-film photovoltaics require less energy in their manufacturing than crystalline Si photovoltaics, and this translates to lower emissions of heavy metals, SOx, NOx, PM, and CO2. In any case, emissions from any type of PV system are expected to be lower than those from conventional energy systems because PV does not require fuel to operate. PV technologies provide the benefits of significantly curbing air emissions harmful to human and ecological health. It is noted that the environmental profiles of photovoltaics are further improving as efficiencies and material utilization rates increase and this kind of analysis needs to be updated periodically. Also, future very large penetrations of PV would alter the grid composition and this has to be accounted for in future analyses.

The four types of PV examined were multicrystalline silicon, monocrystalline silicon, ribbon silicon, and thin-film cadmium telluride.

Cadmium telluride was best overall but

At least 89% of air emissions associated with electricity generation could be prevented if electricity from photovoltaics displaces electricity from the grid.

The estimated energy payback time (EPBT) for PV ranges from 6 years to 1.1 years, depending upon the type of PV, the insolation, and the installation. PV panels are usually rated to have a lifetime of 25 to 30 years. Now you know what to say when anybody questions whether PV's produce more energy than it takes to make them.

originally posted at http://www.dailykos.com/storyonly/2008/2/28/232952/333/722/466075

Solar on the Radio

I was interviewed on the Samantha Clemens show on Saturday, February 16 over Tufts University radio, WMFO. You can listen to the interview at http://www.samanthaclemens.com/Guests.html

We had a good time talking about the fact that Solar IS Civil Defense and other things. Have a listen and let me know what you think.

My Solar Christmas

As a Christmas gift, I donated solar ovens to people in the refugee camps around Darfur. For the people there, who are at risk every time they have to leave the camp to seek scarce fuel, a solar oven can mean survival.

Jewish World Watch sends two solar ovens to the Iridimi and Touloum refugee camps in Chad for $30.

There are other solar oven programs as well.

This video from German CARE is especially close to my heart because it shows a woman in one of the 3 international displaced person camps they run in Easten Chad using a solar oven and a "haybox" or retained heat cooker to prepare a meal.



The haybox is simply an insulated box into which you place a hot pot. The heat has nowhere to go but into the food. You can also use a stone as a heat reservoir: heat the stone, place it in the box with a pot of food, cook. It's an old, old technique updated with solar. I love these ancient solutions to common problems.

Here's another youtube report on a solar cooker workshop held in Nyala, Sudan under the auspices of the Darfur Peace and Development Organization.



I also gave the gift of bees and trees as I do every year through Heifer International. Donate bees, trees, rabbits, geese, chickens, goats, as well as heifers to a project from their catalog somewhere around the world, including the US, in the names of your loved ones.

I like to give bees because they are all about pollination and improving agricultural production. Investment in pollination in these days of colony cluster disease is especially important.

I like trees because they are also a carbon offset. I've given a decade and more's worth of 60 trees a year to Heifer International. That should do something to absorb some of the carbon my energy use has released to the atmosphere.



Last but certainly not least, I also gave a few solar LED flashlights and AA battery chargers to friends and family. These Bogolights are very well designed with one button (on and off) and one screw to secure the battery bay. There's even a phosphorescent band so you can find the flashlight in the dark. They work as reading lights too. I know because I tried them out. They also use standard AA rechargeable batteries and allow for battery switching, charging one set of batteries while using another set in a second device.

Bogo means "buy one, give one" by which they mean, you spend $25 to buy one for yourself and the company sends a second to somebody in the developing world. You can even choose where and what program. A good deal.

I gave these solar flashlights because

Solar IS Civil Defense